Abocom RE450 Instalační příručka Strana 13

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 78
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 12
Setting Up Workstations for Imaging 449
Novell Confidential Manual (99a) 28 October 2003
Additional Information About Booting to Linux
The following sections contain additional information:
“Adding Linux Device Drivers” on page 449
“Booting with a Non-English Keyboard” on page 451
Adding Linux Device Drivers
If you need to, you can add Linux device drivers to your boot device or method.
“Obtaining Linux Drivers” on page 449
“Adding Linux Drivers to Your Boot Device or Method” on page 449
Obtaining Linux Drivers
To obtain a Linux driver for your particular hardware, you should visit the Web site of the hardware
vendor and check for a download location.
There are also some other Web sites where you can obtain drivers:
Network drivers can be downloaded from the Scyld Computing Corporation* (http://
www.scyld.com). Click Network Drivers.
PCMCIA drivers can be downloaded from the Linux PCMCIA Information Page (http://
pcmcia-cs.sourceforge.net).
You can also get additional Linux drivers at the ZENworks Cool Solutions Web Community (http:/
/www.novell.com/coolsolutions/zenworks/features/a_linux_drivers_zw.html).
To learn more about drivers, including the loading parameters you need to specify, see the Linux
Documentation Project (http://www.linuxdoc.org) and visit the following HOWTO (http://
www.linuxdoc.org/HOWTO/HOWTO-INDEX/howtos.html) sites:
Hardware
PCMCIA
SCSI
Ethernet
Adding Linux Drivers to Your Boot Device or Method
Diskettes
For information, see “Using Zimgboot.exe to Add Linux Drivers” on page 484.
CD
For information, see “Preparing an Imaging Boot CD” on page 448.
Hard-Disk Partition
It is unlikely that you will need to add Linux drivers if you are using a ZfD Workstation Imaging
partition. If you want to update the Linux drivers, however, follow this procedure:
1 Boot the workstation using imaging boot diskettes, an imaging boot CD, or if it is PXE-
enabled, boot it from the Imaging/Preboot Services server.
Zobrazit stránku 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 77 78

Komentáře k této Příručce

Žádné komentáře